PRODUCT
PRODUCT

Aluminum Bar


1050 Aluminum Bar

1050 Aluminum is a commercially pure aluminum alloy that is known for its excellent corrosion resistance, high thermal conductivity, and good workability. It is commonly used in various industries such as electronics, chemical equipment, and signage.

1060 Aluminum Bar

1060 aluminum is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance, and workability. 1060 aluminum has low mechanical strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat treatment.

1070 Aluminum Bar

Aluminium 1070 alloy is a wrought alloy type with good corrosion resistance. It is an excellent brazing alloy. Aluminium 1070 alloy is chiefly used in the following areas:General industrial components,Building and construction,Transport,Electrical material,PS plates,Strips for ornaments,Communication cables,Refrigerator and freezer cabinets,For joining two pieces of aluminium / aluminum.

1100 Aluminum Bar

Aluminum 1100 is one of the most widely used alloys, with excellent forming properties, especially in the fully soft, annealed temper. It may be suitable for applications that require bending, spinning, drawing, stamping and roll forming.
Aluminum 1100 alloy is widely used in fin stock, heat exchanger fins, spun hollowware, dials and name plates, decorative parts, giftware, cooking utensils, rivets and reflectors, and in sheet metal work.

3003 Aluminum Bar

Aluminum 3003 alloy has moderate strength and good corrosion resistance. The strength of this alloy can be increased by cold working.
Aluminium 3003 alloy is used in ductwork, chemical equipment, and general sheet metal work. It is also used in manufacturing the following items:Cooking utensils,Builder's hardware,Pressure vessels,Ice cube trays,Eyelet stock,Awning slats,Gas lines,Garage doors,Refrigerator panels,Heat exchangers,Gasoline tanks,Storage tanks,Drawn and spun parts.

3A21 Aluminum Bar

3A21 aluminum is the most widely used type of anti-rust aluminum. Its strength is not high (slightly higher than industrial pure aluminum). 3A21 aluminum can not be strengthened by heat treatment. So cold processing method is adopted to improve its mechanical properties.

5052 Aluminum Bar

Aluminum 5052 alloy is a non-heat treatable alloy with good corrosion resistance, especially to salt water.
Aluminum 5052 alloy is used in the manufacture of the following products:Milk crates,Hydraulic tubes,Appliances,Kitchen cabinets,Small boats home freezers,Aircraft tube,Fencing.

5005 Aluminum Bar

Aluminum 5005 alloy is a non-heat treatable alloy with small amount of magnesium content. It has excellent corrosion resistance and weldability characteristics.
Aluminum 5005 alloy is widely used in the manufacture of the following products:Small boats,Appliances,Utensils,Gas lines,Refrigerator panels.

5A05 Aluminum Bar

The 5A05 aluminum is an Al-Mg rust-proof aluminum alloy, which cannot be heattreated and the colddeformation of the alloy can improve the strength. The plasticity in the annealed state is high, and the plasticity in the semi-cold hardening state is acceptable. The alloy has good corrosion resistance and good weldability, and is suitable for spot weldingatomic hydrogen welding, gas welding, and argon arc welding. its machinability, semi-cold hardening state is still good.
Application areas: armor plates, high-strength structural parts, ship sheet metal parts, fuel tanks, etc.

5083 Aluminum Bar

Aluminium 5083 is known for exceptional performance in extreme environments. Aluminium 5083 is highly resistant to attack by both seawater and industrial chemical environments.
Aluminium 5083 also retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys but is not recommended for use in temperatures in excess of 65°C.
Aluminium 5083 is used in:Shipbuilding,Rail cars,Vehicle bodies,Tip truck bodies,Mine skips and cages,Pressure vessels.

6061 Aluminum Bar

Aluminum 6061 alloy can be easily formed and worked in the annealed condition.
Aluminum 6061 alloy has excellent weldability. Thinner sections can be welded using the gas tungsten arc welding technique. Heavier sections can be welded using the gas metal arc welding technique.
Aluminum 6061 alloy is used in the following applications:Truck and marine components,Furniture,General structural and high-pressure applications,Pipelines,Heavy-duty structures,Railroad cars,Tank fittings.
< 1 >

Global Search

Did you not find the information you were looking for? Please leave your contact information and we will send you a list of dealers from various regions.

Search HistoryClear all records
Up to 8 historical search records can be displayed~
Product Management
  • All
  • Product Management